Printable Version of Topic

Posted by: radium02

Hi. Since Tmobile got rid of the free wap, I can't connet to the itnernet via my MPX200. So on friday i went to the website and purchased the tzones for 4.99. Now today is Sunday and it still doesn't work on my MPX200. I've tried altering the connections and the data but it still doesn't work!!

However, I used the data configurator for my v600 and the internet is working fine on there...



I have an MPX200 with WM2003 (SUPER_MOTO_2_MPX200(2003).img)
it wasn't working when I had WM2002 either. PIE first says Connectiong...Finding site..."The page you are looking for cannot be found"


What are the ACTUAL settings for the MPX200 to use the WAP through tzones?

Posted by: smeg36

Use the exact settings you find in the T-Mobile forum here, but instead of the internet2.voicestream.com, use wap.voicestream.com. Other than that, I am using the exact same setttings with my $4.99 T-Zones fine. It did take me about 3 days for the T-Zones to start working though.

Posted by: GrYph0n

Use these settings, as long as they are put in correctly you should have no problems...

http://www.mobilegadgetnews.com/modules.php?op=modload&name=FAQ&file=index&myfaq=yes&id_cat=30#79

Posted by: radium02

works!! yeah!

Posted by: czerwonka

My data connections DO NOT work unless I put in the following:

GPRS CONNECTIONS:
Description: T-Mobile GPRS
Connects to: The Internet
Access Point: wap.voicestream.com
User Name:
Password:
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address:

WAP CONNECTIONS:
Description: T-Mobile WAP
Connects to: WAP
Access Point: wap.voicestream.com
User Name:
Password:
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address:

PROXY CONNECTIONS:
Description: T-Mobile
Connects From: The Internet
Connects To: WAP Network
Proxy (name:port): 216.155.165.50
Type: WAP
User name:
Password:

Settings-Data Connections:
Internet Connection: T-Mobile GPRS
WAP Connection: T-Mobile WAP

INTERNET EXPLORER > MENU > OPTIONS > CONNECTIONS:
UN-Tick 'automatically Detect Settings'
Select network: WAP

For the life of me I cannot get the settings posted on this site to work. I can't get IE/E-mail to connect by automatically detecting settings and using a network other than wap. I would LOVE if someone could provide some insight.

I'm in Chicago, on an MPx200 with WM2003.

Posted by: GrYph0n

Hmmm... I just brought my phone back to life in a different body (got a new phone and restored a back up from my last one). I had unlimited data then, now I just have T-Zones, all I had to do is change internet3.voicestream.com to wap.voicestream.com, and I also deleted the Primary and Secondary DNS, saved the changes and was blazen through the net on my phone and had full email access once again. I am using the exact settings as posted on this site (minus the DNS, which doesn't matter if you have the right ones in there), on a phone running the HelloMoto 2003 and everything works good as far as I have tested...

Posted by: dafeigei

Gryph0n, were you able to get agile messenger to work using those settings?

Posted by: GrYph0n

Well I just tried it briefly a bit ago, I managed to connect in yahoo via agile but didn't have the time to let the others connect, I was testing to see if it would work. I will try again later when I have more time. (you may wonder why I didn't have time, well I was on a smoke break and I don't get signal within my office that I had to get back to.)

Posted by: smeg36

My settings just stopped working! I am on vacation, and was using my phone as my main internet source. It worked when I got here, then stopped overnight. I am certain it is a problem with my phone because I went into a T-Mobile store today, and they tested my SIM out for me on their phones. It worked no problem. I can't for the life of me figure out why it isn't working, I am using the same settings as when it was. I figure a reflash would fix it, but I don't have my computer with me!

Posted by: sonik

WAP CONNECTIONS:
Description: T-Mobile WAP
Connects to: WAP
Access Point: wap.voicestream.com
User Name:
Password:
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address:


Where do you go to enter the following information? In my Connection setting there are only these 4 options:
1 Dial Up Connections
2 VPN Connections
3 Proxy Connections
4 GPRS Connections

I cant find the option for WAP Anywhere. Please help. Thanks.

Posted by: MadTxn

Put it in GPRS Connections

Posted by: sonik

GPRS CONNECTIONS:
Description: T-Mobile GPRS
Connects to: The Internet
Access Point: wap.voicestream.com
User Name:
Password:
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address:

WAP CONNECTIONS:
Description: T-Mobile WAP
Connects to: WAP
Access Point: wap.voicestream.com
User Name:
Password:
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address:

PROXY CONNECTIONS:
Description: T-Mobile
Connects From: The Internet
Connects To: WAP Network
Proxy (name:port): 216.155.165.50
Type: WAP
User name:
Password:

Settings-Data Connections:
Internet Connection: T-Mobile GPRS
WAP Connection: T-Mobile WAP

INTERNET EXPLORER > MENU > OPTIONS > CONNECTIONS:
UN-Tick 'automatically Detect Settings'
Select network: WAP



I have been trying to connect with the settings posted here but continues to get the follow message:

"Unable to connect. Verify you have network coverage and try again."

What else would get it to work? Thanks for helping.

Posted by: GrYph0n

What data plan do you have on your account, what type of SIM card are you using (i.e. Voicestream, Powertel, etc...)? Have you double checked your settings, if one thing is off then you will not be able to connect.

Posted by: sonik

Guess wat, I just tried to put a brand new spanking SIM into the phone that I just got with a new service plan it it works just fine. The new line is identical to the one that I have been using. I DID NOT change any setting on the phone except swapping the SIM and Wahhhlaaaa it works. That's it for now. Good luck to all..

Posted by: Illah

Back from the dead... Reason I did so is because the settings in the FAQ worked for me, but only when I UN-ticked the 'automatically detect settings' in IE. The FAQ states to tick this setting, and it wasn't working so I toyed around and UN-ticking did the trick.

Thanks,

--Illah

Posted by: smeg36

It seems that the only settings with a definate consitency is the $19.99 unlimited internet plan. Since it is designed to be used for full internet access (and not just access to the T-Zones website), it will always work. The T-Zones ($4.99 or $9.99) settings keep changing, and are different in different parts of the USA. There isn't much consitency with them. You can't really complaign though as you are getting more than you paid for (full internet access). If only I could go back to the good ol' days when I was getting the exact same service as I am now for free. Those were a good 11 or so months.

Posted by: BitchinCamaro

After many painful attempts, I finally set up my Internet on my MPx200/t-mobile successfully. I'm in Colorado, USA.

Here are my settings:

Internet Cxion: T-Mobile GPRS (my custom setting)
WAP Cxion: T-Mobile WAP (custom again)

My Proxy is:

name: T-Mobile Proxy
connects from: The Internet
Connects to: WAP Network
Proxy (name:port): 216.155.165.50:8080
Type: HTTP
User Name: <blank>
Password: <blank>

My GPRS:

name: T-Mobile GPRS
Connects to: The Internet
Access Point: internet2.voicestream.com
User Name: <blank>
Password: <blank>
Primary DNS: 216.155.175.40
Secondary DNS: 216.155.175.41
IP Address: <blank>

My WAP:

name: T-Mobile WAP
Connects to: The Internet
Access Point: wap.voicestream.com
User Name: <blank>
Password: <blank>
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address: <blank>

PIE > Menu > Options > Connections:
Automatically detect settings: deactivated
Select Network: WAP Network


Phew!

I hope this helps anyone in the Western US region. I had to search all over and combine different settings to finally get something that works. I've seen many different settings with various success rates. It would definitely appear that location impacts the required settings quite a bit. As I said, I had to combine different settings from many different posts before I finally got something that worked. Try this if you're in the western region (CO, NM, AZ, WY, etc.), and good luck! (BTW, I've got the $4.99 t-zones plan, and I can access the full Internet--but you didn't hear that from me!)

Cheers!

Posted by: mrmikej25

The t zones deal had me confused for awhile, because some said it could get full internet by unofficial means, and some said it couldn't get it at all, and others said only in certain regions. I still don't know which is correct, but I do know that I just recently got the 4.99 plan, with which I have been getting full internet access. I also had to find the right settings as many forums had different info on the process. If it is a regional issue (I'm in minnesota), I would be happy to post my settings:

My proxy settings:

connects FROM: WAP
connects TO: the internet
proxy: 216.155.165.50:8080
type: http

My GPRS settings:

connects to: WAP network
access point: wap.voicestream.com
both DNS: 0.0.0.0
No IP address

In PIE settings, auto detect is checked, and the network is, oddly enough, set to work.

Any questions about this setup, ask away.

Posted by: Craig

As a data point, these settings work for me in WA as well. Full internet with the T-Zones package (but it's now $5.99).

Thanks for the tips.

Posted by: dondagun

PLEASE HELP... Audiovox SMT 5600 T-Mobile I can't receive or send MMS on my phone.

I just cant seem to get my MMS running, anyone who has the correct MMS settings
please post them for I have tried many different settings.
OK these are all my current Data GPRS/Proxy and MMS settings


GPRS Authentication: (PAP Authentication)

My MMS settings under preferences are:

Retrieve immediately (checked)
No. attempts (3)
Connect Via (the internet)
Photo Resolution (Original resolution)

Under MMSC Settings:

T-Mobile MMSC (checked)

Under T-Mobile MMSC settings:

Name- (T-Mobile MMSC)
MMSC URL- (http://216.155.174.84/servlets/mms)
WAP Gateway- (216.155.165.50)
Port- (9201)
Max Sending Size- (100k)


My Data Connections settings :

Internet Connection- T-mobile GPRS
Work Connection- Automatic
WAP Connection- T-mobile WAP
Secure WAP Connection- Automatic

Under my GPRS Connections:

(T-mobile GPRS)
Connects to:The Internet
Access point: internet2.voicestream.com
"Username, password, 1st & 2nd DNS, IP address" are blank

(T-mobile WAP)
Connects to: WAP Network
Access point: wap.voicestream.com
"Username, password, 1st & 2nd DNS, IP address" are blank

Under my Proxy Connections:

(T-mobile Proxy)
Connects from:The Internet
Connects to:WAP Network
Proxy (name:port): 216.155.165.50:0
Type: WAP
"Username, password" are blank

For the record my browser and my MSN messenger are working fine for those who are having problem with theres

Posted by: BitchinCamaro

Here's an interesting update for those interested:

I previously posted my connection settings in Colorado. Since that time, those settings no longer work; however, if I use the settings of mrmikej25 from Minnesota, my connections work. Also, if I activate the detect settings option, I can use any network. If I deselect the option, everything still works so long as I choose Internet for my network. It doesn't make a great deal of sense, but who cares, because it works just fine. Go figure.

Posted by: baby j

This work for my VOQ A 10 Just fine. I've been having problem setting up my tzones for the last two months. Finally my Thanks to all.

Posted by: abatis

This http://www.mobilegadgetnews.com/index.php?s=&showtopic=11177&view=findpost&p=48330 should set up your T-Zones. Works on Voq and SP5.

Posted by: Jagwire

does anyone get the error this page contains errors and cannot be displayed?