Main Menu

[mpxer07]

Hi,
While setting up a gprs connection I am required to manually enter an ip address. But when I bring the cursor down to the ip address field I can't enter a dot "." the usual way by pressing the "1" button. Also the display at the top-right corner of the screen turns to "123" while it usually says "abc" or "ABC" when entering names, messages etc. How do I enter a dot between numbers while entering the ip address in the gprs connection settings?

Help greatly appreciated.
Thanks.

[smeg36]

If you press and hold the * you can switch between 123, and abc. You can then enter the . using abc.

[runningtiger]

Exactly...what Smeg said. Just wanted to add that I've found it easiest to enter all the numbers for a particular box then switch to "abc" and go back an enter the "." all at once. Seems like a little less switching back and forth and back and forth.

[mpxer07]

Thanks a lot! It works

[GrYph0n]

in abc mode you can also press and hold the key for the number to pop up, that is usually the smoothest method for me.