I was wondering if this is the latest firmware available. It seems newer than the 0630-012 from the firmware package.
I came across this file somewhere but can't seem to remember.
Well I came across BEN6-0650-035 and suppose i remember where.
Except I have no idea what this version is all about? is this the orange version?
and if so, suppose i flash my phone with it, can i go back to the previous version? or will this newer version work
You "should" be able to go back to the other version if you have the image to flash back to your phone. Unless you are talking about going back to the AT&T firmware, there is no way to get that back...
31,653,208 Ben-6-0840-035.img
31,481,092 BEN6-0504-012.img
31,510,791 BEN6-0470-012.bin
31,726,972 BEN-6-0733-058.img
31,731,070 BEN-6-0720-052.img
31,731,070 BEN-6-0710-052.img
31,878,598 BEN-6-0681-040.img
31,849,912 BEN-6-0640-022.img
31,645,012 BEN6-0630-012.img
Thats all my colection till now
wow florin, could you also tell us what is so different between them?
also, seems like you missing one hehe
I'm flashing now all of them and gona put a list whith what they are
Wich one i missed?
either i'm blind but i don't see the BEN6-0650-035 file. care to exchange??
Is Ben-6-0840-035.img the lates one.
Can some one PM where to get this
I hope some one gets hold of a Smartphone 2003 image.
thanks
Is there a Smartphone 2003 Image avail for the Mpx2003???
No there is no WM sp2k3 image available for smartphones at all as of yet...
florin,
Any updates on that list of yours? I also have quite a few img files, but I do not have the generic one to fall back on so I am not willing to just flash my phone to find out.
-Huck
I can not reveal my sources, but I do know that they are MPx200 firmware loads, I just do not know the details of the loads. They range from BEN6-0700-048 to BEN6-0880-048.
-Huck
I one can send me the latest version i can flash it and see which version comes up. Is it possible to go back my current version if it end up being some other language or something ?
You can always reflash your phone to it's current state, except to the AT&T firmware, but if you have generic firmware then yes you can restore it to it's current state.
Side Note: Feel free to discuss these different firmware versions, but keep in mind that there is a seperate forum all together for makeing requests.
T-Mobile posted a while back w2k3 firmware for PocketPC phone edition. Will this work on mpx200? Or it runs a different OS?
totally different OS. The PPC version will not work on the smartphone...
x3lda, patje,
yes?
I have (BEN6-0630-012.img) whatever that means. worked fine for me but i would still like to know what is different about them.
cyberjack,
BEN6 means Bethovens's 6 ???
And what about the last digits? You say it is the provider version. This gives that any version you flash is 'branded' to some provider???
redetogo,
what do you mean by 'worked fine for me'? What problems did you solve by flashing this BEN6-0630-01.img???
By flashing the phone with the firmware it took out all carrier branding,added mms software,camera software,photo software,and also added triband. I can not really tell if it is any faster or not, but there is an mpx tweak for this which works very well. The BEN file i used by the way was (BEN6-0630-12.img) Im running the mpx200 sim unlocked,apps unlocked on Cingular in the USA. Was on ATT<< not anymore. LOL
redetogo,
so you had a ATT-locked phone and you can use it now with a non-ATT SIM. Good. What about 900MHz? As far as I know, there's no 900 MHz provider in US, so are you sure the firmware upgrade did provide triband?
(sorry to bother you, but I bought one MPX200-ATT phone from eBay, and I want to be absolutely sure that the BEN6-0630-12.img will enable triband)
TIA,
I had 650-035 on my phone and was experiencing some problems, especially with phone losing registration to the network after some inactivity time. I wanted to try some newer firmware, but was unable to find one. So, today I downgraded the phone to 630-012. It works andIt is on 900MHz only network. My first impressions are of some faster reactions of the phone - during menu navigation and especially when establishing GPRS connections.
Nikolay,
you say that after flashing the phone works only on 900Mhz??? What about SIM-locking? Your phone was locked to a specific provider SIM, and now you can use it with other SIM?
Oh, no. The network I am on is 900 MHz only - so I am sure that the phone uses the 900Mhz band. In the menu the usual 900/1800 and 1900 bands appear. The phone was not locked to start with - it was a generic (not operator branded or modified phone).
What I have read - on this and other sites - but have not confirmed myself - is that some (or may be all) ATT branded phones are also hardware tweaked and despite the generic software don't work at all ot work not reliably on 900MHz. Also, that operator locking has nothing to do with firmware - the lock status is preserved after firmware change. But as I said, those things I have only read and I cannot be 100% sure.
mariusq, don't get confused. Flashing the phone does NOTHING to the SIM-lock. You have to get a completely different thing to SIM-Unlock your phone, a unlock code that will be unique to your phone only. There are a couple different services out there that will do this, such as http://www.imei-check.co.uk/.
smeg36,
still confused :-(
where is the SIM-lock code? Isn't it stored somewhere in the phone's ROM (aka firmware)? or does this phone (smartphone/windows phone) have 2 ROMs: one for the phone and one for the windows software? i heared about http://www.imei-check.co.uk but I am unclear about how do they remotely unlock the SIM-lock. i mean they do send in return of IMEI a code to be typed in or a program that should be run on the phone? and what does this code/program do?
please bear with me. i'm a newbie. at least in smartphones.
The unlock code is separate from the firmware. From my experience, whatever service you use to unlock your phone will ask for your IMEI number (*#06#) and some ammount of money. In return they will send you an unlock code. The thing is that you will need to have a different vendors SIM card inorder to enter this code. Someone correct me if I am wrong on this. Once you put the other SIM card in and power the phone up, it will ask you for the SUBSDY Unlock code. Enter the code you were given and your phone will then be unlocked - for good. Swapping FW will not change this, once your phone is unlocked it stays unlocked.
huckfinn is correct. The SIM-Lock is completely seperate from any firmware. You get a code, and when a foreign SIM is placed in the phone, it allows you to enter a code to use that SIM card.
mariusq,
Sims card locked or unlocked has nothing to do with the firmware.
As (smeq36) said a good place to do this is www.imei-check.co.uk, I had mine unlocked there, it took five to ten minutes and no longer. Cost was
like $35 US dollars. its very simple just go to the site and follow what is say to do and you will be fine.
Second, As for as triband goes these are the two i have to choose from.
1900 and 900/1800 as you can see the 900 and 1800 are together.
I have tried both and they work fine for me, but i just stay on auto. Hope this helps.
Since 2*900 = 1800, this is normal. (I mean the 900/1800 selection in the menu).
This also make me belive that indeed firmware upgrade 'unlocks' the 900MHz band.
I'm currently using a UK Orange branded phone with SIM unlock using a Vodafone SIM card.
I'm not having many problems, so will a new firmware improve any functions? Is it worth updating?
Thanks.
My experience with ATT branded phones is that if you upgrade the firmware and unlock the phone it does not mean that an ATT branded phone will work reliably on 900MHz. My advice is that if you need 900MHz and you want to take the risk of buying a ATT branded phone you should be prepared to be disapointed. I would really like to hear from anyone out there that knows what has been done and if it can be fixed. You can email me at: hooperinternational at hotmail.com if you don't want to post your answer. Cheers, John
I checked it out on my MPX200 works well. But it is a little heavier on the space. Eats up more spaece in flash and the working area. One noticed advantage is that it improve OTA(Over the Air) response for custom installation from sites thru SMS or direct push.
Hope this helps. But not sure if this is the latest. When we are talking about versions are we talking the build or the operator version?
I checked out the firmware by installing in my MPX200. It works fine. PRobably a bit heavy on the storage, It takes more storage space than 630-012. Only noticed improvement was OTA(Over the Air) response. I installed a few chnages from ATT customization is worked.
I am not sure if this is the latest firmware. If there is a corelation on the firmware image naming then it shouldn't be.
any chances of pointing me to where i can get this mirracle img file?
BEN6-0630-12.img
if you guys know where that can be obtained give me a holla @
stanziskand@juno.com
I just got the BEN6 0630-12 anyone wnat to trade for the newest one 733 or what ever.?
Just thought that I would throw in that out of the many firmware versions that I have tried, BEN6 0630-12 was the smoothest one. It seemed that it is a little faster and more responsive than others that I have tried out. There really aren't any noticable differences in the ROM's that I could notice, but that one seemed to be less buggy. For example the last one that I tried out was I belive Ben6-07xx-0xx, and I would have to hit the action key several times on what was selected to get it to preform the action. Also noticed problems ending calls on a few other versions, but I can't really recall which was which at this point. I can say that I have had no bad experiences with BEN6 0630-12.
The latest Retail FW for Germany is BEN6-0900-052 ....
Jack
and any differences with the others?
Well that 900 band seems to be a pretty tricky thing. I have seen where BEN6-0630-012.img actually enabled the 900 band on a presons phone to where it worked flawlessly, and I have also seen where it did jack squat for a different persons' phone. I think that it all has to do with the phone and not so much the firmware at this point and time...
where can i download the latest firmware for ma mpx200
You can make a request in the firmware request forum... AFTER you read the sticky with the rules for making requests.
Ben-6-0950-046 what is it? is it sp2003? is it better then super moto2 with the flower for mpx200?
Ben-6-0920-012.img is my favorite.
Anyone else flashed with 0920?
Is anyone willing to trade 0920-012 for some other 0920?
I'd love to get a hold of a decent ROM with "US English" or "Russian" locale as default!
I took me 3 minutes to replace WM2003 with Ben-6-0920-012.img
I just did NOT like WM2003.
Ben-6-0980-039.rom.zip
Ben-6-0980-060.rom.zip
Inc Flasher and vs...
You can download http://www.mpxzone.com/inside_mpx200.php this page...
I don't understand this nomenclature BEN6-0xxx-0xx wich one of this is the super moto 2 upgrade
did the firmware request forum go away? Any way to request them now?
Just call Cingular tell then that you want to migrate your account from ATT wireless to Cingular the fee is $18 they will give you new cingular sim card and you can keep the same number. If you choose 2 year plan you can get free phone from them , check cingular website for free phones.
here is information on unlocking mpx200
http://www.mpx200.org/forums/index.php?showtopic=2297
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)