Printable version of Entry

Click here to view this entry in its original format

abatis' Blog

Vista User Access Protection can drive you nuts, how to turn it off/on

The Vista User Access Protection can drive you nuts as you transfer and setup files and programs to your new Vista install. If you want to turn it off in the short-term (not recommended for normal ops) here's how to turn it on or turn it off.
Enable or Disable UAP:

1. Click Start
2. Click Control Panel
3. Select System and Maintenance
4. Click Administrative Tools
5. Double-click System Configuration
6. Click Continue (if prompted)
7. Select the Tools tab in the System Configuration window
8. Here you can choose Disable UAP or Enable UAP from the bottom of the listbox
9. Click Launch
10. Reboot to see effect

Powered by IP.Blog (
© Invision Power Services (